Steel shot angular is available in three hardness classes: GH, GL and GP. It can be used in compressed air blasting machines and also in wheel blasting systems – preferably with wear protection. Depending on the degree of hardness, this abrasive will sooner or later round off in the operating mixture. Steel shot angular is ideally suited for cleaning, roughening, descaling and for blasting as preparation before coating metallic workpieces. We will be happy to help you…
Application areas
Typical physical properties | |
---|---|
Hardness GP | 40 – 53 HRC (390 – 550 HV) |
Hardness GL | 54 – 60 HRC (570 – 720 HV) |
Hardness GH | > 61 HRC (> 740 HV) |
Grain shape | angular |
Melting point | ca. 1535 °C |
Specific gravity | ca. 7 g/cm3 |
Bulk density* | ca. 4,0 – 4,6 g/cm3 |
Microstructure | martensitic |
*depending on grain size
Typical chemical analysis | |
---|---|
C | 0,80 – 1,20 % |
Mn | 0,40 – 1,50 % |
Si | 0,35 – 1,20 % |
S | max. 0,05 % |
P | max. 0,05 % |
Fe | remainder |
Designation | Average grain size (mm) |
---|---|
G 12 | 1,7 – 2,4 |
G 14 | 1,4 – 2,0 |
G 16 | 1,0 – 1,7 |
G 18 | 0,7 – 1,4 |
G 25 | 0,4 – 1,2 |
Designation | Average grain size (mm) |
---|---|
G 40 | 0,3 – 1,0 |
G 50 | 0,2 – 0,7 |
G 80 | 0,1 – 0,4 |
G 120 | 0,1 – 0,3 |
Other grain sizes can be produced if required.
If you are interested in sending the current price offer, or if you have any inquiry, please fill out the attached contact form or contact us by phone or e-mail.
phone: +421 905 56 36 34
e-mail: wexi@wexi.sk
All items marked with an asterisk (*) are required to submit the form successfully.