Conditioned cut wire shot is our specialist for shot peening. The rounding of the cylinder edges creates a conditioned grain which is classified as belonging to grain shapes G1, G2 and G3. Blasting with rounded steel wire shot is used to increase the load-bearing capacity and service life of dynamically stressed components such as springs, gears and shafts. A solidified surface significantly increases bending and torsional strength. We will be happy to help you…
|Typical physical properties|
|Hardness (norm)||+/- 56 HRC (640 HV)|
|Melting point||ca. 1535 °C|
|Specific gravity||ca. 7,4 g/cm3|
|Bulk density*||ca. 4,4 – 4,8 g/cm3|
*depending on grain size
|Typical chemical analysis|
|C||0,73 – 0,78 %|
|Mn||0,50 – 0,80 %|
|Si||0,10 – 0,30 %|
|P||max. 0,035 %|
|S||max. 0,035 %|
Other grain sizes can be produced if required.
If you are interested in sending the current price offer, or if you have any inquiry, please fill out the attached contact form or contact us by phone or e-mail.
phone: +421 905 56 36 34
All items marked with an asterisk (*) are required to submit the form successfully.